In the realm of automotive convenience, the Ford Edge fob reigns supreme, offering a seamless keyless experience. However, unforeseen circumstances, such as a lost or misplaced fob, can leave you stranded with a locked car. Fret not, for the Ford Edge’s ingenious design allows you to access the vehicle using a hidden key concealed within the fob. Embark on this step-by-step guide to unlock the secrets of the Ford Edge’s real key.
Identifying the real key’s location is the first step in this unlocking adventure. Look for a small, rectangular release button on the backside of the fob. Press this button firmly to release the mechanical key, which will slide out smoothly. Once you have the key in hand, proceed to the next stage of your mission.
With the real key at your disposal, locate the keyhole on the driver’s side door handle. Carefully insert the key into the keyhole and turn it counterclockwise to unlock the door. Once the door is open, you can insert the key into the ignition and start your vehicle as usual. Remember to keep the real key within reach in case your fob batteries die or encounter technical difficulties.
Removing the Fob Cover
1. **Locate the small notch on the side of the fob.** This notch is usually located near the bottom of the fob.
2. **Insert a small flathead screwdriver or other thin object into the notch.** Pry the fob cover open carefully.
3. **Once the fob cover is open, you will see the key blade.** The key blade is usually located on the opposite side of the fob from the buttons.
4. **Grasp the key blade and pull it out of the fob.** The key blade may be held in place by a small spring. Be careful not to lose the spring.
Understanding the Fob Cover
The fob cover is made of plastic or rubber and protects the key blade and the electronic components inside the fob. The fob cover can be removed for a variety of reasons, such as to replace the battery, repair the fob, or access the key blade.
The fob cover is typically held in place by a series of clips or snaps. To remove the fob cover, you need to locate these clips or snaps and release them. Once the clips or snaps are released, the fob cover will come off easily.
Here is a table that summarizes the steps for removing the fob cover:
| Step | Description |
|---|---|
| 1 | Locate the small notch on the side of the fob. |
| 2 | Insert a small flathead screwdriver or other thin object into the notch and pry the fob cover open carefully. |
| 3 | Once the fob cover is open, you will see the key blade. Grasp the key blade and pull it out of the fob. The key blade may be held in place by a small spring. Be careful not to lose the spring. |
Exposing the Real Key
The real key is located inside the key fob. To expose it, you will need to:
1. Press the small button on the back of the key fob. This will release the mechanical key.
2. Pull the mechanical key out of the key fob.
3. Flip the key fob over and locate the small hole on the back.
4. Insert the mechanical key into the hole and turn it clockwise. This will release the back cover of the key fob.
5. Remove the back cover to expose the real key.
The real key is a small, metal key that is used to manually unlock the car door. It can also be used to start the car if the key fob is lost or damaged.
Here is a table summarizing the steps on how to expose the real key from a Ford Edge key fob:
| Step | Action |
|---|---|
| 1 | Press the small button on the back of the key fob. |
| 2 | Pull the mechanical key out of the key fob. |
| 3 | Flip the key fob over and locate the small hole on the back. |
| 4 | Insert the mechanical key into the hole and turn it clockwise. This will release the back cover of the key fob. |
| 5 | Remove the back cover to expose the real key. |
Releasing the Real Key
Unlike traditional key fobs that can be removed with a simple press of a button, the Ford Edge fob’s key requires a specific release mechanism. Follow these steps to release the real key:
- Locate the small, silver-colored release button on the back of the fob, near the top.
- Press the release button and simultaneously pull the top edge of the fob upwards.
- The key will now slide out of the bottom of the fob.
- If the key does not slide out easily, gently jiggle the fob while pulling it upwards.
- Once the key is out, it can be used manually to unlock the car’s doors or start the ignition.
- To reinsert the key, simply slide it back into the bottom of the fob until it clicks into place.
| Step | Action |
|---|---|
| 1 | Locate the release button on the back of the fob. |
| 2 | Press the release button and pull the top edge of the fob upwards. |
| 3 | Slide the key out of the bottom of the fob. |
| 4 | To reinsert the key, slide it back into the bottom of the fob until it clicks into place. |
Replacing the Fob Cover
Follow these steps to replace the fob cover:
1. Remove the key from the fob.
2. Use a small screwdriver or your fingernail to gently pry open the cover.
3. Remove the old cover and insert the new one.
4. Snap the cover back into place.
5. Insert the key back into the fob.
6. Test the fob to make sure it works properly.
7. If you have any difficulty replacing the fob cover, you can refer to the following table for more detailed instructions:
| Step | Instructions |
|---|---|
| 1 | Remove the key from the fob by pressing the small button on the back of the fob and pulling the key out. |
| 2 | Use a small screwdriver or your fingernail to gently pry open the cover. Start at the top of the fob and work your way around. |
| 3 | Once the cover is open, remove the old cover and insert the new one. Make sure that the new cover is aligned properly before snapping it into place. |
| 4 | Snap the cover back into place by pressing down on all sides of the fob. |
| 5 | Insert the key back into the fob. |
| 6 | Test the fob to make sure it works properly by pressing the buttons and checking the LED light. |
Starting the Vehicle with the Real Key
In the event that your Ford Edge fob’s battery dies or malfunctions, you can still start your vehicle using the real key. Follow these steps:
- Locate the keyhole on the driver’s side door handle.
- Insert the real key into the keyhole and turn it clockwise to unlock the door.
- Open the door and enter the vehicle.
- Locate the ignition switch on the steering column.
- Insert the real key into the ignition switch and turn it to the “On” position.
- Press the “Start” button located on the dashboard to start the engine.
- Remove the key from the ignition switch once the engine has started.
- Note: If your vehicle is equipped with a push-button start system, you will need to press and hold the “Start” button for several seconds to start the engine using the real key.
- If you are unable to start your vehicle using the real key, there may be an issue with the ignition system or the key itself. In this case, you should contact a qualified mechanic for assistance.
Additional Notes:
The keyhole on the driver’s side door handle may be covered by a small plastic cap. If this is the case, use a small screwdriver or coin to gently pry the cap off.
If you have difficulty turning the real key in the ignition switch, try wiggling the key slightly while turning it. This may help to dislodge any dirt or debris that may be preventing the key from turning smoothly.
If you lose your Ford Edge fob, you can obtain a replacement fob from a Ford dealership. You will need to provide proof of ownership of the vehicle when ordering a replacement fob.
The table below provides a summary of the steps involved in starting a Ford Edge with the real key:
| Step | Action |
|---|---|
| 1 | Locate the keyhole on the driver’s side door handle |
| 2 | Insert the real key into the keyhole |
| 3 | Turn the real key clockwise to unlock the door |
| 4 | Open the door and enter the vehicle |
| 5 | Locate the ignition switch on the steering column |
| 6 | Insert the real key into the ignition switch |
| 7 | Turn the real key to the “On” position |
| 8 | Press the “Start” button located on the dashboard to start the engine |
| 9 | Remove the key from the ignition switch once the engine has started |
How To Use Real Key From Ford Edge Fob
The Ford Edge is a popular SUV that offers a variety of features and amenities. One of the most convenient features is the key fob, which allows you to unlock the doors, start the engine, and open the trunk without having to take out your keys. However, there may be times when you need to use the real key to unlock the doors. Here are the steps on how to do it:
- Locate the keyhole on the driver’s side door.
- Insert the real key into the keyhole and turn it to the right.
- The door will now be unlocked.
People Also Ask
How do I replace the battery in my Ford Edge key fob?
To replace the battery in your Ford Edge key fob, you will need a new battery (CR2025) and a small screwdriver. Here are the steps on how to do it:
- Locate the small screw on the back of the key fob and remove it.
- Carefully pry open the key fob.
- Remove the old battery and insert the new battery.
- Snap the key fob back together and tighten the screw.
How do I program a new key fob for my Ford Edge?
To program a new key fob for your Ford Edge, you will need two working key fobs. Here are the steps on how to do it:
- Insert one of the working key fobs into the ignition and turn it to the “ON” position.
- Within 10 seconds, press and hold the “Unlock” button on the second key fob.
- Hold the “Unlock” button for 10 seconds, then release it.
- The new key fob will now be programmed.
How do I open the trunk of my Ford Edge without a key?
There are two ways to open the trunk of your Ford Edge without a key.
Using the keyless entry pad
If your Ford Edge is equipped with a keyless entry pad, you can use it to open the trunk. The keyless entry pad is located on the driver’s side door.
- Enter the five-digit code on the keyless entry pad.
- Press the “Trunk” button.
- The trunk will now be open.
Using the valet key
If your Ford Edge is not equipped with a keyless entry pad, you can use the valet key to open the trunk. The valet key is a small key that is usually stored in the glove box.
- Insert the valet key into the keyhole on the trunk lid.
- Turn the key to the right.
- The trunk will now be open.
