As a man with permed hair, you know that it can be a challenge to keep it looking its best as it grows out. The curls can become frizzy and unmanageable, and the overall shape of the perm can start to lose its definition. If you’re not careful, you could end up with a hairstyle that’s more of a mess than a style. But don’t worry, with the right techniques, you can cut your permed hair as it grows out and keep it looking sharp.
One of the most important things to keep in mind when cutting permed hair is to avoid cutting it too short. When hair is permed, it loses some of its natural elasticity, which means that it can’t be stretched as much as unpermed hair. If you cut it too short, it will be more difficult to style and could end up looking frizzy and unmanageable.
Instead, start by cutting off a small amount of hair, and then gradually increase the amount you cut off until you reach the desired length. Be sure to check the hair’s length as you cut it, and stop when it’s about 1/2 inch longer than you want it to be. This will give the hair some room to shrink as it dries, and will help you avoid cutting it too short.
Tips for Cutting Permed Hair That’s Growing Out Male
- Use a sharp pair of scissors designed for cutting hair.
- Start by cutting off a small amount of hair, and then gradually increase the amount you cut off until you reach the desired length.
- Be sure to check the hair’s length as you cut it, and stop when it’s about 1/2 inch longer than you want it to be.
- Cut the hair in sections, starting with the back of the head and working your way forward.
- Use a comb to guide the scissors and help you cut the hair evenly.
- Be patient and take your time. Cutting permed hair can be a challenge, but with a little practice, you’ll be able to get the perfect cut.
Assessing Hair Growth and Texture
Determining the ideal time to cut permed hair requires a comprehensive assessment of its growth and texture. Here are some key factors to consider:
Hair Growth Rate
Understanding your hair’s natural growth rate is crucial. Hair typically grows approximately half an inch per month, but this can vary based on genetics, nutrition, and overall health. To gauge your hair’s growth, track the length between haircuts and divide by the number of months elapsed. This will provide an estimate of your average growth rate.
Factors Affecting Hair Growth Rate:
- Genetics: Hair growth rates are largely determined by your genetic makeup.
- Nutrition: A balanced diet rich in proteins, vitamins, and minerals supports healthy hair growth.
- Overall Health: Hormonal imbalances, stress, and certain medical conditions can impact hair growth.
- Hair Type: Coarse and curly hair tends to grow slower than fine and straight hair.
Hair Texture
The texture of your hair plays a significant role in determining how it responds to a cut. Consider the following factors:
- Density: The density of your hair refers to the number of strands present per square inch. Thicker hair requires more frequent cuts to maintain a neat appearance.
- Porosity: Hair porosity measures how well the hair absorbs and retains moisture. High-porosity hair dries out quickly, making it more prone to breakage.
- Elasticity: Hair elasticity refers to its ability to stretch and return to its original shape. Hair with low elasticity is more fragile and requires gentle handling.
By carefully evaluating your hair’s growth rate and texture, you can determine the appropriate time to trim or shape your permed hair to maintain its desired style and health.
Sectioning and Detangling Permed Hair
Sectioning
To prepare your permed hair for cutting, it’s crucial to section it properly. Start by parting your hair down the center, from the forehead to the nape of the neck. Then, create two additional parts on each side of the center part, parallel to it. This will divide your hair into four main sections: right front, left front, right back, and left back.
Detangling
Detangling permed hair requires a gentle approach. Use a wide-toothed comb or a detangling brush specifically designed for permed hair. Start at the ends of your hair and work your way upwards towards the roots, carefully removing any knots or tangles. Avoid pulling or tugging at your hair, as this can damage the delicate curls.
For particularly stubborn tangles, you may need to use a detangling spray or conditioner. Apply the product to the tangled area and let it sit for a few minutes to soften the hair. Then, gently comb or brush the tangle out, starting from the ends and working towards the roots.
It’s important to detangle your permed hair regularly, especially before cutting, to prevent breakage and ensure a smooth and even cut.
| Tools for Detangling Permed Hair | |
|---|---|
| Wide-toothed comb | Detangling brush |
| Detangling spray | Detangling conditioner |
Using Scissors Specifically Designed for Permed Hair
When cutting permed hair, it’s crucial to use scissors specifically designed for this hair type. These scissors are typically made with high-quality steel and feature sharp, micro-serrated blades that can cut through the curls without snagging or pulling. The micro-serrations create tiny ridges along the blade’s edge, which help to grip the hair and provide a clean, precise cut.
Here are some of the benefits of using scissors specifically designed for permed hair:
- They prevent snagging and pulling, which can damage the hair.
- They provide a clean, precise cut that helps to maintain the shape and integrity of the curls.
- They can help to reduce frizz and flyaways.
When choosing scissors for permed hair, it’s important to consider the following factors:
- Blade material: High-quality steel blades will provide the best cutting performance.
- Blade length: Shorter blades are better for cutting shorter hair, while longer blades are better for cutting longer hair.
- Blade shape: Micro-serrated blades are ideal for cutting permed hair.
- Ergonomic handle: Scissors with an ergonomic handle will be more comfortable to use.
| Feature | Benefits |
|---|---|
| High-quality steel blades | Provide superior cutting performance |
| Micro-serrated blades | Prevent snagging and pulling |
| Ergonomic handle | Comfortable to use |
Cutting from Bottom to Top to Maintain Shape
Cutting from the bottom up helps maintain the shape of a perm, especially when it’s growing out. This method allows you to remove dead ends and split ends that occur naturally over time, while retaining the perm’s curls. Here’s a step-by-step guide to cutting permed hair from bottom to top:
Step 1: Wet and Comb Your Hair
Wet your hair thoroughly with warm water and comb it through to remove any tangles. Avoid using a brush, as it can break the delicate curls.
Step 2: Divide Your Hair
Divide your hair into two equal sections, from the top of your head to the nape of your neck. Secure each section with a hair tie.
Step 3: Lift and Section the Bottom Layer
Take the bottom layer of one section and lift it up at a 90-degree angle. Hold it taut and section off the overgrown ends.
Step 4: Precision Cut the Overgrown Ends
Using sharp hair shears, meticulously trim off the overgrown ends. Cut perpendicular to the hair shaft to maintain the curl pattern. Remember to hold the scissors parallel to the ends to avoid creating notches or unevenness.
| Cutting Technique | Description |
|---|---|
| Point Cutting | Snip into the hair at an angle to create layers and reduce bulk. |
| Blunt Cut | Trim the hair straight across to maintain length and shape. |
| Razor Cut | Use a razor to shave off split ends and create a smoother, softer finish. |
Step 5: Repeat Steps 3-4 for the Remaining Layers
Repeat steps 3 and 4 for the remaining layers of both sections. Be patient and take your time to ensure even cutting.
Creating Layers for Movement and Volume
Step 1: Determine the desired layer height
* For subtle movement and volume, create layers that are 1-2 inches apart.
* For more dramatic movement and volume, create layers that are 3-4 inches apart.
Step 2: Divide hair into sections
* Divide hair into vertical sections of 1-2 inches in width.
* Secure each section with a clip.
Step 3: Start cutting from the bottom
* Begin by cutting the bottom layer of each section.
* Use a downward diagonal cut to create an angled layer.
Step 4: Blend layers
* Once the bottom layer is cut, comb the hair downward and blend it with the next layer using a pair of thinning scissors.
* This will create a smooth transition between layers.
Step 5: Avoid over-layering
* When cutting permed hair, it’s important to avoid over-layering. Excessive layering can weaken the curls and result in a lack of definition.
* Instead, focus on creating a few well-placed layers to enhance movement and volume without compromising the curl pattern.
| Layer Height | Movement and Volume |
|---|---|
| 1-2 inches | Subtle movement and volume |
| 3-4 inches | More dramatic movement and volume |
Avoiding Flyaways When Trimming Bangs
Flyaways are short, wispy hairs that stick out from the rest of the hair. They can be frustrating to deal with, especially if you have already styled your bangs. Trimming bangs and fringe regularly can prevent these annoying flyaways, ensuring a smooth and polished look.
Tips for Avoiding Flyaways when Trimming
- Use Professional Scissors: Use high-quality hair scissors designed for trimming bangs. Dull scissors will tear the hair and create more flyaways.
- Cut Dry Hair: Dry hair is easier to see and manage, allowing for a more precise trim. Avoid cutting wet hair, as it can be more difficult to see and can stretch out the hair, leading to uneven results.
- Hold Hair Perpendicular to Face: To prevent flyaways, hold the scissors perpendicular to your face. This will create a clean, straight cut that minimizes split ends and flyaways.
- Trim Regularly: Regular trims are essential to prevent flyaways. Aim to trim your bangs every 4-6 weeks to remove split ends and keep them looking neat and tidy.
- Smooth and Seal: After trimming, use a smoothing serum or hairspray to tame flyaways and seal the ends. This will help keep the hairs in place and prevent them from sticking out.
- Equipment and Recommended Scissors:
Type Recommended Scissors Professional Hair Scissors Jaguar, Kamisori, Joewell Barber Scissors Mizutani, Feather, Takai Specialty Bang Scissors Fiskars, Babyliss, Tondeo
Avoiding Over-Styling to Preserve Curl Integrity
To maintain the health and definition of your permed curls, it’s crucial to avoid over-styling. Here’s how:
Avoid Hot Tools
Excessive use of heated tools like blow dryers, flat irons, and curling wands can damage permed hair, stripping it of moisture and elasticity. Opt for air-drying or using a diffuser on a low heat setting instead.
Limit Chemical Treatments
Avoid frequent chemical processes like bleaching or coloring, as they can weaken the bonds created during perming. If necessary, choose gentle formulas designed for permed hair and consult with a professional hairstylist.
Minimize Brushing
Over-brushing can break curls and create frizz. Use a wide-toothed comb or brush specifically designed for curly hair to detangle gently and minimize breakage.
Protect from Humidity
Humidity can cause permed hair to lose definition and become frizzy. Use products designed to protect against humidity, such as leave-in conditioners or anti-frizz serums.
Use a Wet-Set Method
Instead of over-styling, try the wet-set method. After washing and conditioning your hair, apply a styling product and twist or braid it into sections. Allow it to dry naturally or under a hooded dryer for defined, frizz-free curls.
Regular Maintenance to Keep Permed Hair Healthy
To maintain the health of permed hair and prevent damage, several steps are crucial:
-
Use sulfate-free shampoo and conditioner specifically formulated for permed hair.
-
Apply a deep conditioning mask at least once a week to restore moisture and nourishment.
-
Avoid using hot styling tools or brushing wet hair, as both can cause breakage.
-
Protect hair from sun exposure by wearing a hat or using a UV protectant spray.
-
Get regular trims to remove split ends and prevent further damage.
-
Limit washing hair to 2-3 times per week to maintain natural oils.
-
Use a wide-toothed comb to detangle hair gently.
-
Massage the scalp regularly with a scalp oil to promote hair growth and health.
-
Follow a healthy diet rich in protein, vitamins, and minerals essential for hair health.
-
Reduce stress, as it can negatively impact hair health.
10. Avoid Over-Processing
Excessive chemical treatments, such as frequent perming or relaxing, can severely damage hair. Over-processing can lead to extreme dryness, breakage, and loss of elasticity. It is recommended to space out perming treatments by several months to allow hair to recover and regain its natural strength.
| Chemical Treatment | Recommended Frequency |
|---|---|
| Perm | 3-6 months |
| Relaxer | 6-12 months |
By following these tips, you can maintain the health and longevity of your permed hair while ensuring it remains stylish and vibrant.
How to Cut Permed Hair That’s Growing Up Male
When your permed hair starts growing out, it can be a little tricky to know how to cut it. You want to keep the perm looking its best, but you also don’t want to end up with a mullet. Here are a few tips on how to cut permed hair that’s growing out male:
- **Start with a little trim.** When you first start to notice your hair growing out, don’t cut it all off at once. Just trim the ends by about an inch or two. This will help to get rid of any split ends and keep your hair looking healthy.
- **Cut your hair in layers.** This will help to add volume and movement to your hair. Start by cutting the top layer of your hair shorter than the bottom layer. Then, cut the next layer of hair even shorter, and so on. This will create a graduated look that will help to blend the perm with your natural hair.
- **Use a texturizing spray or cream.** This will help to add texture and definition to your hair. Apply it to your hair after you’ve cut it, and then style it as usual.
With a little practice, you’ll be able to cut your permed hair that’s growing out male with ease. Just remember to start with a small trim and to cut your hair in layers. With the right technique, you can keep your perm looking its best for months to come.
People Also Ask
How often should I get my permed hair cut?
This depends on how fast your hair grows. If you have fine hair, you may need to get it cut more often than someone with thick hair. A good rule of thumb is to get your hair cut every 6-8 weeks.
Can I cut my own permed hair?
Yes, you can cut your own permed hair, but it’s important to be careful. If you’re not sure how to cut it, it’s best to consult with a professional barber or stylist.
What are some tips for cutting permed hair?
Here are a few tips for cutting permed hair:
- Start with a small trim.
- Cut your hair in layers.
- Use a texturizing spray or cream.
- Be careful not to overcut your hair.
