The Nissan Rogue is a popular SUV that is known for its reliability and performance. However, like all vehicles, the Rogue will need occasional maintenance, including oil changes. If you are planning on changing the oil in your Rogue yourself, you will need to know how to reset the oil life monitor. This is a simple process that can be completed in just a few minutes.
To reset the oil life monitor in a 2009 Nissan Rogue, you will need to:
1. Turn the ignition key to the “ON” position, but do not start the engine.
2. Use the trip computer controls on the steering wheel to scroll through the menu options until you reach the “Oil Life” screen.
3. Once the “Oil Life” screen is displayed, press and hold the “OK” button on the steering wheel for about 5 seconds.
4. The oil life monitor will reset to 100%.
5. Start the engine and allow it to idle for a few minutes. The oil life monitor will then begin to count down again.
Resetting the oil life monitor is an important part of maintaining your Nissan Rogue. By following these steps, you can ensure that your Rogue’s engine is getting the proper amount of oil and that you are not driving with expired oil.
Understanding the Reset Process
Understanding the oil change reset process in a 2009 Nissan Rogue is crucial for ensuring your vehicle’s optimal performance. The Oil Life Monitor (OLM) system tracks oil degradation based on factors such as engine speed, temperature, and oil quality. It calculates an estimated oil life percentage, displayed on your dashboard. When the OLM reaches 0%, it’s time for an oil change. To reset the system, you must perform the following steps:
- Turn the ignition key to the “ON” position. Do not start the engine.
- Locate the “ODO/TRIP” button on the dashboard. It’s usually found on the instrument cluster or the steering wheel.
- Press and hold the “ODO/TRIP” button for 5 seconds. The display will reset to 100% oil life.
- Release the button. The oil change reset is complete.
Additional Notes:
If you have recently changed your oil and filter, it’s essential to reset the OLM system to ensure accurate future readings. It’s recommended to reset the system immediately after an oil change to ensure the OLM system operates correctly.
Resetting the Oil Life Percentage
Once you’ve changed your oil, you’ll need to reset the oil life percentage so that the car knows that it has fresh oil. To do this, you’ll need to follow these steps:
1. Turn the ignition to the “on” position, but do not start the engine.
2. Press the “Menu” button on the steering wheel and select “Settings”.
3. Scroll down and select “Vehicle”.
4. Select “Oil Life”.
Resetting the Oil Life Percentage
| Step | Description |
|---|---|
| 1 | Turn the ignition to the “ON” position, but do not start the engine |
| 2 | Locate the “Settings” button on the steering wheel and press it |
| 3 | Use the arrow keys to navigate to the “Vehicle” menu and press “OK” |
| 4 | Locate the “Oil Life” option and press “OK” |
| 5 | Press and hold the “Reset” button for a few seconds until the oil life percentage resets to 100% |
| 6 | Turn the ignition to the “OFF” position to save the changes |
Resetting in Vehicles with Remote Oil Life Monitoring Systems
Nissan vehicles equipped with the Intelligent Oil Life Monitoring System (IOLMS) will have a remote start button on the dashboard. Follow these steps to reset the oil life monitoring system in these vehicles:
- Turn the key to the "ON" position. Do not start the engine.
- Press and hold the "Remote Start" button on the dashboard. The oil life indicator will start to flash.
- Continue holding the button until the oil life indicator turns off. This will reset the oil life monitoring system.
- Start the engine. The oil life indicator should now be reset.
Detailed Steps for Resetting on Vehicles with Remote Oil Life Monitoring Systems
To provide more detailed instructions, here is a step-by-step guide with additional clarifications:
-
Ignition Preparation: Before beginning the process, ensure that your Nissan Rogue is parked on a level surface, the parking brake is engaged, and the transmission is in the "Park" position for automatic or the "Neutral" position for manual vehicles.
-
Ignition Switch: Turn the ignition key to the "ON" position but avoid starting the engine. Note that some vehicles may require you to press the START/STOP button without pressing the brake pedal to achieve this position.
-
Locating the Remote Start Button: Inside the vehicle, locate the remote start button, typically found on the dashboard or center console. It may be labeled with a symbol resembling an arrow pointing inside a circle.
-
Initiating the Reset: Press and hold the remote start button continuously. This action triggers the oil life indicator on the instrument cluster to begin flashing, indicating that the reset process has commenced.
-
Holding the Button: Maintain pressure on the remote start button until the oil life indicator turns off completely. This may take several seconds, so be patient.
-
Completion: Once the oil life indicator has extinguished, release the remote start button. The oil life monitoring system has now been successfully reset.
-
Engine Start: Start the engine of your Nissan Rogue. Upon starting, verify that the oil life indicator is no longer illuminated, confirming that the reset was performed correctly.
If you encounter any difficulties during this process, refer to your vehicle’s owner’s manual for specific instructions pertaining to your Nissan Rogue model.
How to Reset a 09 Nissan Rogue After Oil Change
Resetting the oil life monitor in a 09 Nissan Rogue after an oil change is a simple process that can be completed in a few minutes. Follow these steps to reset the oil life monitor:
- Turn the ignition key to the "On" position but do not start the engine.
- Locate the odometer reset button on the dashboard. It is usually located on the left side of the instrument cluster.
- Press and hold the odometer reset button until the oil life monitor begins to flash.
- Release the odometer reset button and the oil life monitor will reset to 100%.
People Also Ask About How to Reset a 09 Nissan Rogue After Oil Change
How Do I Turn Off the Maintenance Light on a 2009 Nissan Rogue?
The maintenance light on a 2009 Nissan Rogue can be turned off by following the steps outlined above. The only difference is that when you reach step 3, you will need to press and hold the “Trip” button instead of the odometer reset button.
How Do I Reset the Oil Life on a Nissan Rogue?
To reset the oil life on a Nissan Rogue, follow the steps outlined above.
How Do I Change the Oil in a Nissan Rogue?
To change the oil in a Nissan Rogue, you will need the following materials:
- New oil filter
- New oil (5 quarts)
- Oil pan
- Funnel
- Wrench
Once you have gathered the necessary materials, follow these steps:
- Place the oil pan under the oil drain plug.
- Use the wrench to loosen the oil drain plug.
- Allow the oil to drain into the oil pan.
- Once the oil has drained, replace the oil drain plug and tighten it securely.
- Locate the oil filter and remove it using the wrench.
- Apply a small amount of new oil to the gasket of the new oil filter.
- Screw the new oil filter onto the engine by hand.
- Tighten the oil filter using the wrench.
- Add 5 quarts of new oil to the engine.
- Start the engine and check for leaks.
- Reset the oil life monitor.
